signal processor

  • BSS BLU-100 12x8 Signal Processor with BLU link

    The BSS Soundweb London BLU-100 Signal Processor with BLU link has configurable signal processing and a high bandwidth with a fixed configuration of 12 inputs and 8 outputs and a fault tolerant digital audio bus. The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect and logic objects with “drag and drop” configuration. This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

    Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

    Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

    Features:
    12 Analog Inputs (with 48v Phantom Power per Channel)
    8 Analog Outputs
    Configurable Signal Processing
    Rich Palette of Processing and Logic Objects
    48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

  • BSS BLU-101 Conferencing Processor with AEC

    The BSS Soundweb London BLU-101 Signal Processor with AEC has configurable signal processing and a high bandwidth with a fixed configuration of 12 inputs and 8 outputs and a fault tolerant digital audio bus. The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect and logic objects with “drag and drop” configuration. This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

    The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

    Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

    This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

    The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

    Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

    Features:
    12 Analog Inputs (with 48v Phantom Power per Channel)
    8 Analog Outputs
    Configurable Signal Processing
    12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
    Rich Palette of Processing and Logic Objects
    48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

  • BSS BLU-102 Conferencing Processor with AEC and Telephone Hybrid

    The BSS Soundweb London BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. An array of processing and logic objects and “drag and drop” configuration provide a simple use along with a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface (RJ-11 port enables interfacing with a standard POTS (aka PSTN or Analog PBX), configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

    Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

    This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

    The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

    Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

    Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

    Features:
    10 Analog Inputs (with 48v Phantom Power per Channel)
    8 Analog Outputs
    RJ-11 Telephone Input/Output Port
    Configurable Signal Processing
    8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
    Rich Palette of Processing and Logic Objects
    48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

  • BSS BLU-103 Conferencing Processor with AEC and VoIP

    The BSS Soundweb London BLU-103 offers a fixed configuration of 8 analog inputs and 8 analog outputs, a Voice over IP (VoIP) interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

    The BLU-103 has a VoIP port enables the BLU-103 to interface with two VoIP (SIP v2.0 or later) lines, as well as dedicated AEC processing for up to 8 independent AEC algorithms.

    This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

    The BLU-103 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-806, BLU-805, BLU-800, BLU-326, BLU-325, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

    Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

    Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect™. 12 Control Inputs and 6 Logic Outputs allow the BLU-103 to be integrated with GPIO compatible devices.

    Features:
    8 Analog Inputs (with 48v Phantom Power per Channel)
    8 Analog Outputs
    VoIP Port
    Configurable Signal Processing
    8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
    Rich Palette of Processing and Logic Objects
    48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet Audio Architect

  • BSS BLU-120 I/O Expander with BLU link

    The BSS Soundweb London BLU-120 Expander offers configurable I/O and a high bandwidth, fault tolerant digital audio bus. The BLU-120 is configurable through HiQnet™ London Architect. A rich palette of logic objects and “drag and drop” configuration provide a simple and familiar design environment.

    This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options.

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Rich Palette of Logic Objects
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications:
    Chassis- 19" (single rack space)
    Custom I/O (card based)-yes
    Analog Inputs- up to 16
    Digital Inputs- up to 16
    AEC Inputs- up to 16
    Analog Outputs- up to 16
    Digital Outputs- up to 16
    Telephone Connection- up to 4
    Max Inputs/Outputs- 16
    Config- Software
    LCD Display- yes
    Logic Processing- yes
    RS-232- yes
    GPIO- yes
    Signal Processing (MHz)-no
    Cobranet- no
    SWL Digital Audio Bus- 256
    AVB- no
    Dante- no

  • BSS BLU-160 Signal Processor with BLU link

    The BSS Soundweb London BLU-160 Signal Processor offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and “drag and drop” configuration provide a simple and familiar design environment.

    This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Configurable Signal Processing
    Rich Palette of Processing and Logic Objects
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications:
    Chassis- 19" (single rack space)
    Custom I/O (card based)-yes
    Analog Inputs- up to 16
    Digital Inputs- up to 16
    AEC Inputs- up to 16
    Analog Outputs- up to 16
    Digital Outputs- up to 16
    Telephone Connection- up to 4
    Max Inputs/Outputs- 16
    Config- Software
    LCD Display- yes
    Logic Processing- yes
    RS-232- yes
    GPIO- yes
    Signal Processing (MHz)-800
    Cobranet- no
    SWL Digital Audio Bus- 256
    AVB- no
    Dante— no

  • BSS BLU-320 I/O Expander with BLU link and CobraNet

    The BSS Soundweb London BLU-320 I/O Expander offers configurable I/O, CobraNet audio, and a high bandwidth, fault tolerant digital audio bus. The BLU-320 is configurable through HiQnet™ London Architect. A full selection of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

    This processor features CobraNet audio with primary and secondary ports for fault tolerance. Control is through a separate Ethernet port which allows CobraNet and control networks to be easily separated or mixed depending upon requirements.

    The BLU-320 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options.

    Fiber Optic Media Converter Recommendation:
    BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Rich Palette of Logic Objects
    CobraNet Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications:
    Chassis- 19" (single rack space)
    Custom I/O (card based)- yes
    Analog Inputs- up to 16
    Digital Inputs- up to 16
    AEC Inputs- up to 16
    Analog Outputs- up to 16
    Digital Outputs- up to 16
    Telephone Connection- up to 4
    Max Inputs/Outputs- 16
    Config- Software
    LCD Display- yes
    Logic Processing- yes
    RS-232- yes
    GPIO- yes
    Signal Processing (MHz)- no
    Cobranet- yes
    SWL Digital Audio Bus- 256
    AVB- no
    Dante- no

  • BSS BLU-325 I/O Expander with BLU link and AVB

    The BSS Soundweb London BLU-325 Expander offers configurable I/O, Ethernet AVB audio, and a high bandwidth, fault tolerant digital audio bus and is configurable through HiQnet™ London Architect. A full selection of logic objects and a “drag and drop” configuration provide a simple and familiar design environment.

    This processor features Ethernet AVB audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.

    The BLU-325 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Rich Palette of Logic Objects
    Ethernet AVB Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications -
    Chassis: 19" (single rack space)
    Custom I/O (card based):yes
    Analog Inputs: up to 16
    Digital Inputs: up to 16
    AEC Inputs: up to 16
    Analog Outputs: up to 16
    Digital Outputs: up to 16
    Telephone Connection: up to 4
    Max Inputs/Outputs: 16
    Config: Software
    LCD Display: yes
    Logic Processing: yes
    RS-232: yes
    GPIO: yes
    Signal Processing (MHz):no
    Cobranet: no
    AVB: yes
    Dante: no
    SWL Digital Audio Bus: 256

  • BSS BLU-326 I/O Expander with BLU link and Dante

    The BSS Soundweb London BLU-326 Expander offers configurable I/O, Dante audio, and a high bandwidth, fault tolerant digital audio bus and is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

    This processor features Dante audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.

    The BLU-326 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    The BLU-326 has four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options.

    12 Control Inputs and 6 Logic Outputs allow the BLU-326 to be integrated with GPIO compatible devices.

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Rich Palette of Logic Objects
    Dante Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications:
    Chassis- 19" (single rack space)
    Custom I/O (card based)-yes
    Analog Inputs- up to 16
    Digital Inputs- up to 16
    AEC Inputs- up to 16
    Analog Outputs- up to 16
    Digital Outputs- up to 16
    Telephone Connection- up to 4
    Max Inputs/Outputs- 16
    Config- Software
    LCD Display- yes
    Logic Processing- yes
    RS-232- yes
    GPIO- yes
    Signal Processing (MHz):no
    Cobranet- no
    AVB- no
    Dante- yes
    SWL Digital Audio Bus- 256

  • BSS BLU-50 4x4 Signal Processor with BLU link

    The BSS BLU-50 4x4 Signal Processor with BLU link is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing and logic processing. It can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable, powered with the 12VDC power supply, and also accept 12-48VDC via a terminal block connector.

    The analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.

    The BLU-50 features BLU link, a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.

    The BLU-50 is configured, controlled and monitored from HiQnet Audio Architect™ or HiQnet London Architect™ and is compatible with other members of the Soundweb London family. Its 48 channel BLU link bus represents channels 1-48 of the larger 256 channel BLU link bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus.

    As with other Soundweb London devices, 12 Control Inputs, six Logic Outputs and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.

     

  • BSS BLU-800 Signal Processor with BLU link and CobraNet

    The BSS Soundweb London BLU-800 Signal Processor with BLU link and CobraNet offers configurable I/O, configurable signal processing, CobraNet audio and a high bandwidth, and fault tolerant digital audio bus. The BLU-800 has an open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

    The BLU-800 processor features CobraNet audio with primary and secondary ports for fault tolerance. Control is through a separate Ethernet port which allows CobraNet and control networks to be easily separated or mixed depending upon requirements.

    The BLU-800 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

    Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Configurable Signal Processing
    Rich Palette of Processing and Logic Objects
    CobraNet Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect


    Specifications:
    Chassis 19" (single rack space)
    Custom I/O (card based) yes
    Analog Inputs up to 16
    Digital Inputs up to 16
    AEC Inputs up to 16
    Analog Outputs up to 16
    Digital Outputs up to 16
    Telephone Connection up to 4
    Max Inputs/Outputs 16
    Config Software
    LCD Display yes
    Logic Processing yes
    RS-232 yes
    GPIO yes
    Signal Processing (MHz) 800
    Cobranet yes
    SWL Digital Audio Bus 256
    AVB no
    Dante no

  • BSS BLU-805 Signal Processor with BLU link and AVB

    The BSS Soundweb London BLU-805 Signal Processor with BLU link and AVB offers configurable I/O, configurable signal processing, Ethernet AVB audio and a high bandwidth, and a fault tolerant digital audio bus.

    The BLU-805 has open architecture which is configurable through HiQnet™ London Architect. A full selection of processing and logic objects and “drag and drop” configuration provide a simple design environment.

    This processor features Ethernet AVB audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.

    The BLU-805 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

    Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets)

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    V4 Preset Data Download Page

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Configurable Signal Processing
    Rich Palette of Processing and Logic Objects
    Ethernet AVB Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect


    Specifications:
    Chassis 19" (single rack space)
    Custom I/O (card based) yes
    Analog Inputs up to 16
    Digital Inputs up to 16
    AEC Inputs up to 16
    Analog Outputs up to 16
    Digital Outputs up to 16
    Telephone Connection up to 4
    Max Inputs/Outputs 16
    Config Software
    LCD Display yes
    Logic Processing yes
    RS-232 yes
    GPIO yes
    Signal Processing (MHz) 800
    Cobranet no
    Dante no
    AVB yes
    SWL Digital Audio Bus 256

  • BSS BLU-806 Signal Processor with BLU link and Dante

    The BSS Soundweb London BLU-806 Signal Processor with BLU link and Dante offers configurable I/O and signal processing, Dante audio and a high bandwidth, fault tolerant digital audio bus. The BLU-806 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

    This processor features Dante audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port, low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices.

    Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

    Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets)

    Fiber Optic Media Converter Recommendation: BSS Audio MC-1

    Features:
    Four Input / Output Card Slots
    Configurable Inputs / Outputs
    Analog Inputs (with Phantom Power per Channel)
    Analog Outputs
    Digital Inputs (AES/EBU and S/PDIF)
    Digital Outputs (AES/EBU and S/PDIF)
    AEC Inputs (with Phantom Power per Channel)
    Telephone Hybrid Card
    Configurable Signal Processing
    Rich Palette of Processing and Logic Objects
    Dante Audio
    256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
    Clear Front Panel LED Indication
    Informative Front Panel Display
    Bi-Directional Locate Functionality
    12 Control Inputs and 6 Logic Outputs for GPIO Integration
    Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
    HiQnet Device
    Configuration, Control and Monitoring from HiQnet London Architect

    Specifications:
    Chassis 19" (single rack space)
    Custom I/O (card based) yes
    Analog Inputs up to 16
    Digital Inputs up to 16
    AEC Inputs up to 16
    Analog Outputs up to 16
    Digital Outputs up to 16
    Telephone Connection up to 4
    Max Inputs/Outputs 16
    Config Software
    LCD Display yes
    Logic Processing yes
    RS-232 yes
    GPIO yes
    Signal Processing (MHz) 800
    Cobranet no
    Dante yes
    AVB no
    SWL Digital Audio Bus 256