The CPS 2.6 MK II is designed for the contractor and features 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
| Amplifier Gain |
32 dB |
| Analog Inputs |
2, electronically balanced, Phoenix-type |
| Audio Network |
No |
| CAN Bus Interface |
Optional (RCM-810 card) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω |
900 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω |
600 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω |
380 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω |
500 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω |
250 Watts |
| Cooling |
Front-to-Rear, 3-stage fans |
| Crossover Type |
Optional Modules |
| DIM 30 |
0.02 % |
| Electronics Type |
Amplifier |
| Frequency Response |
10 Hz - 40 kHz ±1 dB |
| Impedance |
2/4/8 Ω |
| Input Impedance (Balanced) |
20 kΩ |
| Input Sensitivity |
+3.1 dBu (1.11Vrms) |
| Intermodulation Distortion (SMPTE) |
0.05 % |
| Mains Voltage |
240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) |
| Maximum Bridged Output 4Ω |
1800 Watts |
| Maximum Bridged Output 8Ω |
1200 Watts |
| Maximum Input Voltage |
+21 dBu 8.69 Vrms |
| Network Control (IRIS-Net) |
Optional |
| Slew Rate |
26 V/µs |
| Topology |
Class-AB |
| Total Harmonic Distortion |
0.03 % |
| Variable Load Drive (VLD) |
No |
| Height |
2RU 88.1 mm (3.47") |
| Width |
482.6 mm (19") |
| Depth |
421.5 mm (16.59") |
| Weight Net |
14.8 kg (32.63 lbs) |
