Electro-Voice Tour Grade amplifiers, such as the TG7, have a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing amps from switching off in excessive thermal environment), automatic mains voltage detection and a circuit breaker control that allows the TG-7 to operate on a 30A (120V) or 16A (230V) circuit breaker with normal music signal.
Tour Grade amplifiers use a grounded bridge 3-step class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers along with the low distortion for critical HF signals. The high capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.
The TG7 features:
- High-power performance for top-level tours
- Rugged, lightweight package
- 3500 W per channel (2 Ω)
- Grounded Bridge Class-H design
- Switch-mode power supply
- Microprocessor-controlled
- Front LCD panel for operation-mode setup and monitoring
- Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
- 11-level protection package
A/D Conversion
|
24 Bit linear, Sigma-Delta, 128 times oversampling
|
Amplifier Gain
|
41.5/35/32 dB Switchable
|
Analog Inputs
|
Yes
|
CAN Bus Interface
|
10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
|
Continuous Rated Power (1 kHz, THD 1%) 2Ω
|
3500 Watts
|
Continuous Rated Power (1 kHz, THD 1%) 4Ω
|
2500 Watts
|
Continuous Rated Power (1 kHz, THD 1%) 8Ω
|
1500 Watts
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω
|
2100 Watts
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω
|
1050 Watts
|
Control Protocol
|
CAN Bus
|
D/A Conversion
|
24 Bit, Sigma-Delta, 128 times over-sampling
|
Data Format
|
24 Bit linear A/D and D/A conversion, 48 Bit processing
|
Digital Inputs
|
Optional with RCM-26
|
DIM 30
|
0.02%
|
FIR-Drive
|
Optional with RCM-26
|
GPIO Control Ports
|
1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
|
Impedance
|
2/4/8 Ω
|
Input Impedance (Balanced)
|
20 kΩ
|
Input Sensitivity
|
0/+6/+9 Selectable
|
Intermodulation Distortion (SMPTE)
|
0.05%
|
Internal Processing
|
2 DSPs (150 MHz, 300 MIPS)
|
Maximum Bridged Output 4Ω
|
7000 Watts
|
Maximum Bridged Output 8Ω
|
5000 Watts
|
Network Control (IRIS-Net)
|
Optional with RCM-26
|
Power Consumption
|
1450 W
|
Power Supply
|
100-240 V, 50-60 Hz
|
Sample Rate
|
48 kHz
|
Sample Rate Conversion (SRC)
|
32 kHz - 192 kHz, internal Sample-Rate- Converter
|
Signal-to-Noise Ratio (A-weighted)
|
111 dB
|
Slew Rate
|
35 V/µs
|
Topology
|
Class-H grounded bridge
|
Total Harmonic Distortion
|
0.05%
|
Height
|
2RU 88.1 mm (3.47")
|
Width
|
482.6 mm (19")
|
Depth
|
512 mm (20.16")
|
Weight Net
|
14.5 kg (31.97 lbs)
|