This model is available with two different dispersion pattern options. The 7200/64 has a 60º vertical and a 40º horizontal dispersion pattern; the /95 has a 90º vertical and a 50º horizontal dispersion pattern. Speakers can be set on their side to change the dispersal orientation. Dispersal patterns are available options by selecting from the drop down menu.
AM7200 speakers are high power mid-high frequency loudspeaker system comprised of one 200 mm (8 in) CMCD Cone Midrange Compression Driver and one 38 mm (1.5 in) exit/75 mm (3 in) voice-coil HF compression driver. The multi-band PT Progressive Transition mid-high frequency waveguide provides well-controlled coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimize band overlap and well-controlled off-axis response enhances arrayability. The cabinet is fitted with M10 threaded suspension points. Preengineered array bracketry is available. AM7200 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.
Features:
CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
2432H High-Frequency Compression Driver
PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
Bi-Amp/Passive Switchable.
Optional planar array frame kits (see AE Series Array Guide).
Applications:
Performing arts facilities
Theatrical sound design
Auditoriums
Houses of worship
Live clubs
Dance-clubs/discotheques
Sports facilities
Themed entertainment venues
Voice-only PA (without LF or subwoofer reinforcement)
Delay fill applications (without LF or subwoofer reinforcement)
Specifications:
|
Frequency Range (-10 dB)
|
260 Hz – 20 kHz
|
| |
Frequency Response (±3 dB)
|
330 Hz – 18 kHz
|
| |
Coverage Pattern
|
/64: 60° x 40°, rotatable waveguide
/95: 90° x 50°, rotatable waveguide
|
| |
Crossover Modes
|
Bi-amp/Passive switchable
|
| |
Crossover Frequency
|
2.3 kHz
|
| |
Transducer Power Rating (AES)
|
MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
|
| |
Long-Term System Power Rating (IEC)
|
MF/HF: 200 W (800 W peak), 100 hrs
|
| |
Maximum SPL
|
Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
|
| |
System Sensitivity (1W @ 1m):
|
Passive mode: 108 dB SPL
|
| |
Nominal Impedance
|
8 ohms
|
| |
Midrange Driver
|
JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
|
| |
Sensitivity (1W @ 1m)
(Midrange)
|
108 dB SPL
|
| |
High Frequency Driver
|
JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
|
| |
Sensitivity (1W @ 1m)
(High Frequency)
|
115 dB SPL
|
| |
Enclosure
|
Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
|
| |
Suspension Attachment
|
13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
|
| |
Finish
|
Black DuraFlex™ finish.
White available upon request.
|
| |
Grille
|
Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
|
| |
Input Connector
|
NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
|
| |
Environmental Specifications
|
Mil-Std 810; IP-x3 per IEC529.
|
| |
Dimensions (H x W x D in vertical cabinet orientation)
|
548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
|
| |
Net Weight
|
27.2 kg (60 lb)
|
| |
Optional Accessories
|
M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
