D6 amplifier

csm_dbaudio-d6-amplifier-isometric_4fb5b980cd_743066584
csm_dbaudio-d6-amplifier-isometric_4fb5b980cd_743066584dbaudio-d6-amplifier-front_1686014068


Contact us for more information

 

Product description

The 2 RU two channel lightweight D6 amplifier delivers medium power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, A-Series, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D6 incorporates Class D amplifiers utilizing a switch mode power supply with active Power Factor Correction (PFC), suitable for mains voltages 100 V/120 V/200 V/ 230 V, 50 - 60 Hz and maintains a stable and increased output when used with weak or unstable mains supplies. It is supplied with two NL4 loudspeaker output connectors. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

Digital Signal Processing

Equalizer
4-band PEQ/Notch
Latency analog and digital inputs
0.3 msec.
Delay setting
0.3 - 340 msec with 0.1 msec detents
Configurations
Current d&b loudspeakers (except 2-Way Active, V-Series and B2-SUB) and linear mode
Function switches
d&b loudspeaker specific circuits
Frequency generator
Pink noise or Sine wave
Sampling rate
96 kHz/27 Bit ADC/24 Bit DAC

Controls and indicators

Power
Mains power switch
Scroll/Edit
Digital rotary encoder
Display
Liquid Crystal Display (LCD)/120 x 32 pixel
ISP, GR, OVL A/B
LED indicators

Connectors

INPUT ANALOG (A1 - A4)
3 pin XLR female
ANALOG LINK (A1 - A4)
3 pin XLR male
INPUT DIGITAL (D1, D2)
3 pin XLR female AES 3
DIGITAL LINK (Output)
3 pin XLR male
Sampling Digital AES/EBU
48 kHz/96 kHz
Sampling rate
48 kHz/96 kHz
OUT CHANNEL A/B
NL4
REMOTE
2 x RJ 45 parallel, CAN-Bus
SERVICE
USB type B
Mains connector
powerCON®

Data (linear setting with subsonic filter)

Maximum output power per channel (THD+N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms


2 x 600/350 W
2 x 600/350 W
S/N ratio (unweighted, RMS)
> 110 dBr

Power supply

Type
Autosensing switch mode power supply with active Power Factor Correction (PFC)
Rated mains voltage high range
208 - 240 V, 50 - 60 Hz
Rated mains voltage low range
100 - 127 V, 50 - 60 Hz

Dimensions / weight

Dimensions (H x W x D)
2 RU x 19" x 353 mm/13.9"
Weight
8 kg/17.6 lb

Connect With dB Sound Store Today

Since 1992, dB Sound Store has worked with some of the biggest artists, producers and commercial facility owners in the entertainment industry to meet all of their diverse needs. The extensive client list of top industry professionals speaks to dB Sound's commitment to excellence.
Please contact dB Sound Store using the Contact form below. We will respond to you quickly by email or telephone regarding equipment inquiries, Design specs & purchases. We can put a package together to fit any budget. Let us know how we can help you today!

Contact dB Sound Store

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input