Product description
The compact, 2-way passive Y10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Y10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet incorporates a pair of handles whilst M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, two further M10 sockets accept the 8mm load pin to expand the mounting options.
Amplifiers
The d&b D80 amplifier is recommended to drive the Y10P. The d&b D20, 10D, 30D and D6 can also be used.
System data
Frequency response (-5 dB standard)
59 Hz - 18 kHz
Frequency response (-5 dB CUT mode)
118 Hz - 18 kHz
Max. sound pressure1
with D6/10D
with D20/30D
with D80
131 dB
134 dB
136 dB
Cabinets per amplifier channel
2
Loudspeaker data
Configuration
High performance 2-way passive point source loudspeaker
Power handling capacity (RMS/peak 10 ms)
400/1600 W
Nominal dispersion angle (h x v)
110° x 40°
Components
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network
Connections
2 x NLT4 F/M
optional 2 x NL4 or 2 x EP5
Dimensions / weight
Dimensions (H x W x D)
580 x 257 x 341 mm
22.8 x 10 x 13.4"
1 1 m, free field, SPL max peak test signal: pink noise with crest factor 4