Earthworks IML6 Gooseneck Installation Microphone with LumiComm Touch Ring
Engineered to operate remotely with a media control system, integrators have complete freedom to assign function and LED color to the Earthworks LumiComm™ Touch Ring. The IML microphones feature a near-perfect cardioid polar response, a wide frequency response, and an incredibly fast impulse response. What does this mean for your sound? More sonically clear, detailed and intelligible vocals than any other installed sound microphone can deliver.
- 30kHz flat frequency response
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Near perfect polar pattern
- Gooseneck allows quick and easy positioning
- Black finish on exposed sections
- Programmable touch sensor output
- Programmable dual-colored LED light ring
- Light ring engineered for a wide supply voltage range. (From 7V to 28V regulated supply—No external LED resistors needed)
- Touch sensitive flange that provides a pull down touch sensor output (Active Low)
- Light diffuser that houses 10 LEDs providing side illumination (5 Green, 5 Red)
- Current consumption 85mA
- Supplied with either a 5 pin RJ45 connector or a 5 pin Phoenix connector
- Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities, and ambient room miking
Engineered to operate remotely with a media control system, integrators have complete freedom to assign function and LED color to the Earthworks LumiComm™ Touch Ring. The IML microphones feature a near-perfect cardioid polar response, a wide frequency response, and an incredibly fast impulse response. What does this mean for your sound? More sonically clear, detailed and intelligible vocals than any other installed sound microphone can deliver.
Frequency Response: 30Hz to 30kHz ±2dB at 12 inches (30.5cm)
Polar Pattern: Cardioid Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 48V Phantom, 10mA
Max Acoustic Input: 145dB SPL Output: XLR (pin 2+)
Output Impedence: 100Ω balanced (50Ω each pins 2 & 3)
Min Output Load: 600Ω between pins 2 & 3
Noise: 22dB SPL equivalent (A weighted)
