Tour Grade amplifiers, such as the TG-5, have a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing amps from switching off in excessive thermal environment) and automatic mains voltage detection.
Tour Grade amplifiers use a grounded bridge 3-step class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers along with the low distortion for critical HF signals. The high capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.
- High-level touring performance
- Rugged, lightweight package
- 2000 W per channel (2 Ω)
- Grounded Bridge Class-H design
- Switch-mode power supply
- Microprocessor-controlled
- Front LCD panel for operation-mode setup and monitoring
- Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
- 11-level protection package
|
A/D Conversion
|
24 Bit linear, Sigma-Delta, 128 times oversampling
|
|
Amplifier Gain
|
39, 35, or 32 dB Switchable
|
|
Analog Inputs
|
Yes
|
|
CAN Bus Interface
|
10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
|
|
Continuous Rated Power (1 kHz, THD 1%) 2Ω
|
2000 Watts
|
|
Continuous Rated Power (1 kHz, THD 1%) 4Ω
|
1450 Watts
|
|
Continuous Rated Power (1 kHz, THD 1%) 8Ω
|
850 Watts
|
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω
|
1200 Watts
|
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω
|
600 Watts
|
|
Control Protocol
|
CAN-Bus (with RCM 26 module)
|
|
D/A Conversion
|
24 Bit, Sigma-Delta, 128 times over-sampling
|
|
Data Format
|
24 Bit linear A/D and D/A conversion, 48 Bit processing
|
|
Digital Inputs
|
Optional with RCM-26
|
|
DIM 30
|
0.02%
|
|
Electronics Type
|
Amplifier
|
|
FIR-Drive
|
Optional with RCM-26
|
|
GPIO Control Ports
|
1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
|
|
Impedance
|
2/4/8 Ω
|
|
Input Impedance (Balanced)
|
20 kΩ
|
|
Input Sensitivity
|
0 dBu / +6 dBu / +7 dBu Selectable
|
|
Intermodulation Distortion (SMPTE)
|
0.05%
|
|
Internal Processing
|
2 DSPs (150 MHz, 300 MIPS)
|
|
Maximum Bridged Output 4Ω
|
3800 Watts
|
|
Maximum Bridged Output 8Ω
|
2900 Watts
|
|
Network Control (IRIS-Net)
|
Optional with RCM-26
|
|
Power Consumption
|
1000 W
|
|
Power Supply
|
100 - 240V, 50 - 60 Hz
|
|
Sample Rate
|
48 kHz
|
|
Sample Rate Conversion (SRC)
|
32 kHz - 192 kHz, internal Sample-Rate- Converter
|
|
Signal-to-Noise Ratio (A-weighted)
|
109 dB
|
|
Slew Rate
|
30 V/µs
|
|
Topology
|
Class-H grounded bridge
|
|
Total Harmonic Distortion
|
0.05%
|
|
Height
|
2RU 88.1 mm (3.47")
|
|
Width
|
482.6 mm (19")
|
|
Depth
|
512 mm (20.16")
|
|
Weight Net
|
14.2 kg (31.31 lbs)
|
